| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The roll forming machine is also known as a wheel rim forming machine, and is used for symmetrical or asymmetrical roll forming of steel wheel rims. Theroll forming equipment consists of the main machine, hydraulic transmission system, pneumatic system, PC control system and lubrication system.
Generally, small rim lines and large rim lines carry out 3 processes to complete the rim profiling. Each process uses one set of roll forming machines. However, the ultra-large line completes the rim roll forming operation through 4 processes. The 4 thpresses the roll press into a non-skid pattern.
| No. | Description | Data of Roll Forming Machine | ||
| 1 | model number | GX-23/300 | GX-45/600 | GX-48/800 |
| 2 | rolling force | 230KN | 400KN | 500KN |
| 3 | motor power of hydraulic station | 62.5KW | 82.5KW | 165KW |
| 4 | spindle length for setting die | 350mm | 670mm | 900mm |
| 5 | upper and lower shaft speed | 220r/min | 200r/min | 200r/min |
| 6 | spindle length for setting die | 40Cr/140mm | 40Cr/200mm | 40Cr/220mm |
| 7 | distance between upper and lower shaft | 240~380mm | 340~480mm | 380~520mm |
| 8 | travel of lower shaft | 140mm | 140mm | 140mm |
| 9 | feeding speed adjustable range of lower shaft | 2~10mm/s | 2~10mm/s | 2~10mm/s |
| 10 | angle adjustable range of lower shaft | -0.35°~0.17° | ±0.35° | ±0.35° |
| 11 | travel of side guide roller | 100mm | 140mm | 160mm |
| 12 | travel adjustable range of side guide roller | 50mm | 50mm | 50mm |
| 13 | max diameter of guide roller | 200mm | 220mm | 240mm |
| 14 | rated input voltage | 380v | 380v | 380v |
| 15 | rated input power capacity | 62.5KW | 82.5KW | 165KW |
| 16 | copper cable suction,at single core 3+2 wire | 70mm² | 90mm² | 180mm² |
| 17 | cooling water rate of hydraulic station | 2000L/H | 3000L/H | 4000L/H |
1. The forming dies on this wheel rim roll former comes with an easy to dismount design which ensures a quick change of the die, controlling the changing process to take only about 30 minutes.
2. Both the small and large wheel rim lines often use 3 roll forming machines that share one set of automatic load and unload mechanisms. These systems use a 3 process and 4 location design, which saves time and improves production efficiency.
3. The split design between the load/unload unit and the main machine allows for both manual and automatic operations.
4. The roll forming dies can be designed to be symmetric or asymmetric according to processing demands.
5. The upper and lower shafts are hydraulic driven. During the rim profiling, the rotating speed of the upper and lower rollers can be automatically adjusted.
6. The shafts can be adjusted at both dip angles and axial directions. This makes each part of the roller surface uniformity stressed, ensuring the precision.
7. The space between the upper and lower spindle is adjustable, as is the feeding speed.
8. The stroke of a side guide rail is also adjustable.
){kind=link}